CPSC: Robert Bosch Tool Corp. Recalls Hammer Drills Due to Risk of Injury
CPSC
WASHINGTON, D.C. - The U.S. Consumer Product Safety Commission, in
cooperation with the firm named below, today announced a voluntary
recall of the following consumer product. Consumers should stop using
recalled products immediately unless otherwise instructed.
Name of Product: Bosch Hammer Drills
Units: About 9,700
Manufacturer: Robert Bosch Tool Corp., of Mount Prospect, Ill.
Hazard: The drill can continue to operate after the trigger has been released, posing a risk of injury to consumers.
Incidents/Injuries: None reported.
Description: The recalled hammer drill is blue with "BOSCH" printed on the side. The model number 1191VSR can be located on the product nameplate mounted on the side of the motor. The product's packaging will be marked as 1191VSRK (the "K" indicates that the hammer drill was packaged with a case in a kit). Only drills with a serial number that begins with "7" are included in the recall.
Sold at: Menards and other hardware retailers and industrial distributors nationwide from July 2007 through April 2008 for about $100.
Manufactured in: Malaysia
Remedy: Consumers should stop using the recalled hammer drill immediately and contact the firm for a free repair.
Consumer Contact: For additional information, contact the Robert Bosch Tool Corp. toll-free at (877) 472-0007 between 7 a.m. and 7 p.m. CT Monday through Friday, or visit the firm's Web site at www.boschtools.com
To see this recall on CPSC's web site, including pictures of the recalled product, please go to: http://www.cpsc.gov/cpscpub/prerel/prhtml08/08303.html
This news arrived on: 06/23/2008
Printer Friendly Version | Send this page to a friend | Post Comment
Rate This Story:
Great - 5 - 4 - 3 - 2 - 1 - Bad
Posted Comments:
Comment archive | Comment FAQ's
 |
 |
View Home and Consumer ezine stories by date or visit the complete archive |
The ArcaMax Politics channel is one of 70 content categories offered by ArcaMax Publishing on this ... |
Body Mass
